Figuring Out Houses

Facts on Home Dehumidifiers It is a known fact that there are two kinds of humidity, relative humidity and absolute humidity. It is proven beyond any doubt that absolute humidity refers to the amount of water vapour divided by the amount of dry air in a volume of air at a known temperature. On the other hand relative humidity refers to the ratio of the current absolute humidity to the highest possible humidity. Humid indoor air is uncomfortable, to say the least, but it also causes damage the home and on furnishings. It is a widely known fact that humidity also causes the growth of mold and encourage dust mites to invade the home. Humidity is also a health hazard since some people are allergic to moisture. An interesting fact is that purchasing a quality humidifier is thus a significant investment for every homeowner. Relative humidity should not go above 40-50%. Signs of high humidity levels include the following: creaking floors, condensation on windows and exacerbated allergic reactions. It is absolutely important to note that to determine the humidity standards of the home, the homeowner can purchase a small cheap hygrometer. In most cases, normal humidity levels should be between 30-50%, with a range during winter of 30-40% and summer 30-50%. An interesting observation is that Humidity levels above 59% are uncomfortable with most people, and if the levels reach 60%, then they become extremely uncomfortable for most people. It is important to highlight that on the other hand, humidity levels below 30% make the air feel dry for many people. High humidity also raises the energy bill as air conditioners have to dehumidify and cool the air. The higher the humidity levels, the higher the energy used in dehumidifying the air and thus having a humidifier significantly reduces the bill on the AC.
Getting Down To Basics with Homes
It is quite agreeable to state that a humidifier is a device that helps to reduce the levels of humidity in the air. In the market there are two types of humidifiers; that is desiccant models and mechanical models. In terms of mode of operation desiccant models use a drying agent to remove the moisture in the air. A surprising fact is that the dehumidifying process involves exposing desiccant matter to an air stream therefore, they do not use any compressors and thus are inexpensive for use in areas that have low temperatures and low levels of humidity.
Discovering The Truth About Houses
Mechanical models, on the other hand, work like air conditioners and contain both hot and cold coils in them. It is impeccable to emphasize that they also have a fan that draws in the air over the cold coil and then the moisture is collected in a bucket after which the dry air then goes on to the hot coil that heats it back to its original temperature. It is worth noting that these models are expensive, but they are the vest to use in areas that have high temperatures and high humidity levels.